It is essential to study the mechanical properties of saturated rock under different loading and unloading paths for strength calculation, safety assessment and disaster prevention; however, current literature rarely mentions conventional triaxial loading and unloading conditions. To ana-lyze the mechanical properties, strain energy evolution characteristics and failure mode, a series of conventional triaxial unloading tests (with axial loading rate va of 0.06–6 mm/min and circumferential unloading rate vu of 0.1–10 MPa/s) and conventional triaxial compression tests were carried out on saturated granite. The test results showed that the damage sources of specimens in the conventional triaxial unloading test were mainly related to circumferential deformation, while in the conventional triaxial compression test, it was related to the axial deformation. Under the same va, the confining pressure and axial stress at the failure point decreased with the increase of vu, and the stress coordinate of the failure point was located outside the conventional triaxial compression en-velope of σ1–σ3. As vu increases, except for the variation of circumferential strain energy ΔUc decreasing slowly, the trend of strain energy changes must be determined together with va. As va in-creases, the relationship between the magnitude of each energy changes from ΔUa > ΔU > ΔUd > ΔUe > ΔUc to ΔUd > ΔUa > ΔU > ΔUe > ΔUc, while the change of dissipated energy is dominated by vu and va together to become dominated by va. In addition, with the increase of vu and va, the damage pat-tern of the specimen also changes from shear damage in a single shear plane to mixed damage with tensile strain failure and shear plane during which the dilation angle of the specimen increases in total except for vu = 10 MPa/s, va = 0.6 mm/min and 6 mm/min. © 2022 by the authors. Li-censee MDPI, Basel, Switzerland.